S355J0 S355J2 EN10025 Structural Steel Plate cast steel plate8

[aqogywisujalipibeta]

Product Name:S355J0 S355J2 EN10025 Structural Steel Plate cast steel plate
Product Description:
S355 Grades S355JR, S355J2, S355J0 and S355K2 yield strength steel plate is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. S355JR, S355J2, S355J0 and S355K2 non-alloy steel plates have good weldability and machinability, let us see more mechanical details of this steel.
Identification of Different S355:
S - stands for structural steel
355 - stands for minimum yield strength (though it will vary based on thickness, refer below section for more details)
Normally S355 will have following variation based on impact strength at different temperatures, as steel become more brittle when temperature drops. If your structure need to withstand -20°C, it's better and safer to choose S355J2.
S355JR - Can withstand an impact energy of 27J at +20°C
S355J0 - Can withstand an impact energy of 27J at 0°C
S355J2 - Can withstand an impact energy of 27J at -20°C
S355K2 - Can withstand an impact energy of 27J at -30°C (40J at -20°C)
And sometime followed by a letter H, like S355J2H, here H stands for hollow section.
S355 Grades S355JR, S355J2, S355J0 and S355K2 Yield Strength:
S355 Grades S355JR, S355J2, S355J0 and S355K2 is named based on it's minimum yield strength of 355 Mpa (N/mm2), However the yield strength reduces when you go up in thickness above 16 mm for flat products & hollow sections
Here is the table showing reduction in yield strength based on thickness
Up to 16 mm - 355 Mpa
16 mm < t ≤ 40 mm - 345 Mpa
40 mm < t ≤ 63 mm - 335 Mpa
63 mm < t ≤ 80 mm - 325 Mpa
80 mm < t ≤ 100 mm - 315 Mpa
100 mm < t ≤ 150 mm - 295 Mpa
S355 Tensile Strength
S355 ultimate tensile strength ranges also varies based on thickness.
Up to 3 mm - 510 Mpa to 680 Mpa
3 mm < t ≤ 100 mm - 470 Mpa to 630 Mpa
100 mm < t ≤ 150 mm - 450 Mpa to 600 Mpa
S355 DensityDensity of S355 is 7850 kg/m3 like all other mild steel
S355 Hardness (Brinell Hardness-HB) ranges from 146 HB to 187 HB.
S355 Young's Modulus
S355 Youngs's Modulus is 190 to 210 Gpa, in a conservative design go for 190 Gpa
S355 Equivalents
S355 EN 10025:1990 Equivalent
S355J2 → S355J2G4 (1.0577)
S355K2 → S355K2G4 (1.0596)
S355 DIN 17100 Equivalent: S355J0 → St 52-3 U; S355J2G3 → St 52-3 N
S355 ASTM Equivalent: S355 → A572 Grade 50 (Yield Strength 345 Mpa)
Price:888.00
Product Website:[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]
Company Description
Gnee Corten Steel
Address:HenanHenanAnyangWenfengNo.1018, Wanda Centre, Zhonghua Street, Wenfeng District, Anyang, Henan, China
Descption:Gnee Group are professional one-stop solution for steel products.

Gnee Corten Steel is one of the subsidiary of Gnee, is a supply chain integrated enterprise including corten steel plate, coil, pipe, profile,etc.

We also have a professional architecture team for project design and solutions.
Registered Capital:100
EmployeeNum:100
Gnee Corten Steel
Contact:Kelly Zhang
Telphone:86-0372-5055135-0
Fax:86-0372-5055180-0
Email:cortensteels@aliyun.com
Company Website:[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]

[jetskiukforsale]

[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ] Hóng

[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]