Altair HWDesktop 2019.1.2 Hotfix



Altair HWDesktop 2019.1.2 Hotfix | 951.4 mb


The Altair HyperWorks product team has released an update to HyperWorks Desktop 2019.1. Version 2019 introduces exciting additions to the broadest and most powerful suite of physics solvers on the market, new time-saving workflows, and dramatic improvements to the industry's best modeling and visualization platform.


Altair HyperWorks Desktop 2019.1.2 Release Notes


Connectors
Resolved Issues
- Resolved an issue with loading .hm files because of an improperly created connector entity.
- Resolved projection issues with the seam connector of the type hexa (adhesive - shell gap).
2D Meshing
Resolved Issues
- Fixed an issue with the Parameter Editor where the holes 2D table with the "Elem Mode" column setto "Exact" was not writing to the parameter file correctly. This caused the Elem Mode to be set asMinimal instead.
- Resolved issues with the "Add Washer" and "Trim Hole" tools, where the collector widget did nothave focus upon launching the dialog.
Collaboration Tools
New Features
- Updated TeamCenter SOA to TeamCenter11.4 libraries.
- Additional customization support for Windchill Connector.
Crash and Safety
New Features
Mechanism Tool
The new COUPLER joint is now available. This joint is defined as a constraint between two joints,letting you emulate any coupling of selected joints' degrees of freedom. For example, couplinga slider joint with a revolute joint to create a Rack and Pinion, or coupling two revolute joints tocreate a gear joint or pulley joint.
Enhancements
Mechanism Tool
The automatic mechanism builder GUI is now part of the Entity Editor. This gives you access toother browsers and any entity graphical interactions such as Show and Hide.
Pre-simulation Tools
You can now read the LS-Dyna dynain file generated by input decks in either Long or i10 format.
Resolved Issues
- Seatbelt entities defined in the Seatbelt System Tool are now maintained in the respective includefiles where they are defined.
- In the LS-Dyna profile, the seat deformer pre-simulation model now exports correctly when dummycomponents have a material ID parameterized with PARAMETER_LOCAL.
- In some cases, mechanism manipulation was not possible in the mechanism tool when Bodies wereconstrained. This behavior is now corrected.
API
Resolved Issues
-*setvalue now correctly writes *createmark to the command file when using mark=.
- Resolved a crash using the deprecated refflag_# argument with *isolateentitybymark.
Conversion Between Solver Formats
Enhancements
Dyna to Pamcrash conversion
Element set converted to *SET_SHELL_LIST
Nodes set converted to *SET_NODE_LIST
Component sets converted to *SET_PART_LIST
*CONTACT_AUTOMATIC_GENARAL_ID converted to CNTAC46
*CONTACT_AUTOMATIC_SINGLE_SURFACE_ID converted to CNTAC36
*CONTACT_AUTOMATIC_SURFACE_TO_SURFACE_ID converted to CNTAC33
*CONTACT_TIED_SHELL_EDGE_TO_SURFACE_BEAM_OFSET_ID converted to TIED
Dyna to Nastran conversion
*SET_SHELL_LIST converted to SET
*SET_NODE_LIST converted to SET
Nastran to Dyna conversion
SET converted to *SET_SHELL_LIST
SET converted to *SET_NODE_LIST
Nastran to Pamcrash conversion
SET converted to Element/Node set
Pamcrash to Dyna conversion
Elements set converted to *SET_SHELL_LIST
Nodes set converted to *SET_NODE_LIST
Components set converted to *SET_PART_LIST
CNTAC46 converted to *CONTACT_AUTOMATIC_GENARAL_ID
CNTAC36 converted to *CONTACT_AUTOMATIC_SINGLE_SURFACE_ID
CNTAC33 converted to *CONTACT_AUTOMATIC_SURFACE_TO_SURFACE_ID
TIED converted to *CONTACT_TIED_SHELL_EDGE_TO_SURFACE_BEAM_OFSET_ID
Pamcrash to Nastran conversion
Element set converted to SET
Node set converted to SET


General
Resolved Issues
- Delete, swap and copy/paste pages with HV windows and active result browser could causeHyperWorks Desktop to crash in 2019.1. These issues have been resolved.
- Notes are now restored when opening a session file or report template with only Model loaded.
- Grid Point Forces/Moments values incorrect when nodes have output system referring to anothercoordinating system
- Eroded elements no longer display during animation of certain femzip result files.


General
Resolved Issues
- Clear session with HV/HG window layout and change client from HyperView to HyperGraph couldcause HWD to crash in 2019.1. This issue has been resolved.
- Fit Range option in advanced options of build Descriptions panel causing unwanted behavior of auto fittingof curves. This option has been removed to fix this issue.
- BINOUT file generated from LsDyna R11.1 version has issues in reading the 2019.1 version ofHyperGraph. This issue has been addressed in this release.
- Report templates generated from advanced build Descriptions dialog are different from the build Descriptionspanel in 2019.1. This issue has been resolved.


General
Resolved Issues
- Issues related to window pressure due to Z axis reversal / beam orientations have been fixed.
- Failures occurred when the temperature file contains scientific notation TEMP 1 7 10.2+4. Thisissue has been fixed.
- Joint Load Method: DLS Ratio no longer fails.
- Start Element and Node ID specified is no longer ignored when Respect Mesh Manifold option is ONfor Stiffened panel mesh.
- Resolved an issue with Spring Configuration, where a regression introduced in 2019.1.1 brokeresults for spring cbush in both *.op2 and *.xdb files
- Resolved an issue with results, when Model files used Includes. In some cases, the JointLoadmethod would not run.
- Resolved an issue with the JointLoad method for the DLS Ratio calculation. The projection systemwas incorrect when 1D elements were not perpendicular to pierced shells. This led to incorrect DLSratio values.
Altair has released Altair HyperWorks 2019, the latest version of its simulation- and AI-driven product development platform. The new release expands on its solutions available for designers and engineers under a single, open-architecture platform.


- Fast simulation of complex assemblies. Altair SimSolid performs structural analysis on original, unsimplified CAD assemblies in seconds to minutes. SimSolid can analyze complex parts and large assemblies quickly.
- Easy-to-learn fatigue life prediction. Altair HyperLife enables customers to quickly understand potential durability issues through a solution for fatigue life under static, transient and vibrational loading. The intuitive user experience enables test engineers to perform simulations with little or no training. HyperLife helps customers to confidently predict product durability in hours.
- Efficient workflows for multi-physics. Altair SimLab is an intuitive workflow platform for simulating multi-physics problems. Design exploration is easier with synching to CAD tools. The multi-physics workflows feature deeply embedded solvers, including statics, dynamics, heat transfer, fluid flow, electromagnetics analysis, fluid-structure interaction and electromagnetic-thermal coupling.
- High-fidelity modeling. HyperWorks 2019 includes a robust Altair HyperMesh version. New features enable the generation of the larges finite element models. The model build and assembly tools in HyperMesh make managing large, complex assemblies easier. This allows CAE to keep pace with design changes by rapidly swapping new parts and assemblies into existing models, managing multiple configurations, mesh variants and part instances, the company says.
- Enhanced user experience for fast concept modeling. The HyperWorks platform already includes Altair Inspire, Altair Activate and SimLab delivering solutions with intuitive and consistent user-interfaces. Altair HyperWorks X is included with a new set of workflows for geometry creation, editing, morphing and meshing employing this same user experience.
- Expanded non-linear solver functionality. The single-model, multi-attribute workflow enabled by OptiStruct helps engineers perform linear, non-linear and durability analysis using one optimization-ready model.
Introducing HyperWorks 2019






About Altair. Altair is a leading provider of enterprise-class engineering software enabling innovation, reduced development times, and lower costs through the entire product lifecycle from concept design to in-service operation. Our simulation-driven approach to innovation is powered by our integrated suite of software which optimizes design performance across multiple disciplines encompassing structures, motion, fluids, thermal management, electromagnetics, system modeling and embedded systems, while also providing data analytics and true-to-life visualization and rendering.
Product: Altair HyperWorks Desktop
Version: 2019.1.2 Hotfix Only
Supported Architectures: x64
Website Home Page :
[Misafirler Kayıt Olmadan Link Göremezler Lütfen Kayıt İçin Tıklayın ! ]

Language: english
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: Altair HyperWorks Desktop 2019.1 and above
Size: 951.4 mb


Operating System: Windows 7even (64bit) or Windows 10 (64bit),
RAM: 4 GB (higher recommended)
Graphics Hardware: OpenGL 3D graphics accelerator compatible with OpenGL 3.2 or higher, True color (24-bit) support, 2 GB or higher dedicated RAM, Only AMD and NVIDIA GPUs supported (Intel chipsets are not supported)




DOWNLOAD LINKS :

Kod:
https://rapidgator.net/file/386d85cfd9baa6f5b0e466962e65bf88/jqmsk.Altair.HWDesktop.2019.1.2.Hotfix.rar.html

https://uploadgig.com/file/download/59de078eD1F3f911/jqmsk.Altair.HWDesktop.2019.1.2.Hotfix.rar

https://nitroflare.com/view/51C663564EB2BA3/jqmsk.Altair.HWDesktop.2019.1.2.Hotfix.rar