Product Name:Light Weight High Alumina Poly Ball Brick
Product Description:
Description
Light Weight high alumina poly ball brick




Light Weight high alumina poly ball insulation refractory brick

20220909152835adda9a6ca24c4d2597e45139d7e9dc2f

20220909152836cb46203dfcb040dbbf5e66f2592dc88e

Product Description

Light Weight High Alumina Poly Ball Insulation Refractory Brick For Furnace
Light Weight high alumina poly ball insulation refractory bricks usually use high alumina bauxite clinker and a small amount of clay, after being finely ground, they are cast in the form of mud by gas generation method or foam method, and fired at 1300-1500°C. Sometimes industrial alumina can be used to replace part of bauxite clinker.

Using high alumina bauxite powder and refractory clay as the main raw materials, adding combustible additives, ramming, pouring or extrusion molding, drying and high temperature tunnel kiln firing. The product has small bulk density, high compressive strength, and low thermal conductivity.

Light Weight high alumina poly ball insulation refractory brick is used for the lining and heat insulation layer of masonry kilns, as well as the parts that are not corroded and scoured by strong high-temperature molten materials. When in direct contact with the flame, the surface contact temperature shall not be higher than 1350℃.

Specification

Item

HY-0.5

HY-0.6

HY-0.7

HY-0.8

HY-1.0

HY-1.2

HY-1.3

Bulk Density(g/cm3) ≤

0.5

0.6

0.7

0.8

1

1.2

1.3

Compressive strength(Mpa) ≥

1.0

1.5

2.0

3.0

4.0

4.5

5.0

Rebirth line change rate ≤2 %

1260

1260

1260

1300

1300

1300

1300

TRS,Times (1100℃,water )

8

8

8

10

15

15

15

Thermal Conductivity 350±25℃(w/k*m)

0.23

0.26

0.28

0.29

0.3

0.33

0.36

Al2O3(%)≥

45

45

50

50

50

50

50

Fe2O3(%)≤

2.5

2.5

2.5

2.6

2.8

2.8

2.8

_06

Light Weight high alumina poly ball insulation refractory brick for furnace

Light Weight high alumina poly ball insulation refractory bricks Physical and chemical indicators:The AL2O3 content of high-aluminum poly light insulation brick is more than 45%, and it is a light refractory material mainly composed of mullite and glass phase or corundum. The bulk density is 0.4～1.35g/cm3. The porosity is 66%～73%, the compressive strength is 1～8MPa, the fire resistance temperature is 1600 degrees, and the thermal shock resistance is good.

Light Weight high alumina poly ball insulation refractory bricks Features and advantages:

High compressive strength;

Good thermal shock stability;

Resistance to corrosion in various atmospheres;

Excellent thermal shock stability;

Good thermal insulation performance can reduce the heat capacity of the furnace wall;

The energy saving effect is remarkable, and the thermal efficiency of the kiln is high;

It can be processed into various special-shaped products according to customers' design needs.



Light Weight high alumina poly ball insulation refractory brick for furnace

Straight size:230×114×65 230×114×75 230×57×65

Split size: 230×114×32 230×114×40 230×114×25 230×114×50

Arch/Wedge size: 230×114×65/45 230×114×65/55 230×114×75/45 230×114×75/55 230×114×75/65 Tile size: 230×230×38 230×230×50 230×230×65 230×230×75

Other size: Key brick, Skew brick, Soap, Checker, Neck, Taper Also produce bricks according to customers' needs

Manufacturing Technique

workshop 01

Light Weight high alumina poly ball insulation refractory brick for furnace

Light Weight high alumina poly ball insulation refractory bricks Production Process Crushing→Mixing→Shaping→Drying→Firing→In spection→Packaging and Shipment

Light Weight high alumina poly ball insulation refractory bricks



Quality Assurance

Huan Ya Refractory is committed to high quality standards for all its products and services. With its thirst on State of the art technology at every level and a wide range of products, HongTai Refractory can provide ideal solutions for the stringent requirement of the customer.

Backed by decade of experience in different industries, and close association with customers,HongTai Refractory will always bring new products which will give better life and value to the user.



The Light Weight high alumina poly ball insulation refractory bricks quality assurance system consists of the following steps:

Inspection and Control of incoming raw materials:According to the chemical content,raw materials are classified into different levels to ensure quality of brick first.

Inspection and process controluring the production, each brick weight twice to reduce weight error.

Inspection of product Standardization of quality of each product by process control and experimentation.

Taking corrective measures whenever deviations are noted.

_05

FAQ

1.Do you provide free samples?

Yes, we can provide a free sample for testing, If we have sample in stock,

The quantity based on the material type, The buyer should bear all the shipping costs.



2. What's your payment terms?

We can accept 30% deposit, 70% balance before shipment for ordrs over $ 2000.

will be shipped along with goods.



3.What is the difference between Refractoriness and Working temperature ?

Refractoriness:the refractory material withstands high temperature without melting and softening performance in the absence of load resistance.Usually working temperature is less than refractoriness about 350-400°C.



4.Can we get support if we have our own market position?

Please inform us your detailed mind on your market demand,we will discuss and propose helpful suggestion for you,to find the best solution for you.



5.What standards do we have?

Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.

The third party testing is all available for us.

Contact us

Contact person: Martin

Tel:+8613923217470

Email: [Misafirler Kayýt Olmadan Link Göremezler Lütfen Kayýt Ýçin Týklayýn ! ]

[Misafirler Kayýt Olmadan Link Göremezler Lütfen Kayýt Ýçin Týklayýn ! ]

Adderss:4A02, 4A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong, China

Hot Tags: light weight high alumina poly ball brick, China, manufacturers, factory, customized, wholesale, low price, in stock, free sample, Al2O3 55 Alumina Refractory Brick, High Aluminum Hanging Brick, High Alumina Refractory Nozzle Brick Refractory, Knife Shaped High Aluminum Brick, High Alumina Anchor Bricks For Industrial Furnace, Two three four Piece High Alumina Brick

Previous: High Aluminum Hanging Brick
Next: High Aluminum Poly Light Insulation Brick
Inquiry
Your Name:*
E-mail:*
Phone/WhatsApp:
Company:
Subject:
For any information, our service line and email are always there for you.*
Leave a message
Category
Refractory Bricks
Insulation Brick
Ceramic Fiber Product
Aluminum Furnace Equipment & Consumables
Unshaped Refractory
Cotton Insulation
You Might Also Like
HY-55 High Alumina Refractory Brick
HY-80 High Alumina Refractory Brick
Aluminum Poly Light Weight Insulation Bricks
Knife Shaped High Aluminum Brick
T3 Fireclay Refractory Brick
High Alumina Fire Bricks
Related News
Zirconia Refractory Castables: The New Age Heat Resistant Solution For Indust...
Zirconia Refractory Castables: The New Age Heat Resistant Solution For Indust...
Mar 13, 2024

Silicon Carbide Refractory Castables: The Next-generation Solution For High-t...
Silicon Carbide Refractory Castables: The Next-Generation Solution For High-T...
Mar 12, 2024

Home
About Us
Products
News
Knowledge
Contact Us
Feedback
Showroom
Sitemap
Tel: +86-17328087470

E-mail: [Misafirler Kayýt Olmadan Link Göremezler Lütfen Kayýt Ýçin Týklayýn ! ]

Add: 3A09, 3A Floor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong Province, China

Copyright ? Foshan Huanya New Material Co., Ltd. All Rights Reserved.
Price:1.00
Product Website:[Misafirler Kayýt Olmadan Link Göremezler Lütfen Kayýt Ýçin Týklayýn ! ]
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai3A09, 3AFloor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Descption:Huanya New Materials Co., Ltd. is headquartered in Foshan City, Guangdong Province, and has branch factories in Henan Province and Shanxi Province. We have over 20 years professional experience of kiln materials, and R&D capability, production capability, sales capability of refractory materials, specializing in high-end refractory products and raw materials.
Registered Capital:1000000
EmployeeNum:50
Foshan Huanya New Material Co., Ltd.
Contact:Martin Zheng
Telphone:86-0757-85503335-
Fax:86-0757-85503335-
Email:Martin_wf_cheng@aliyun.com
Company Website:[Misafirler Kayýt Olmadan Link Göremezler Lütfen Kayýt Ýçin Týklayýn ! ]