Product Name:Aluminum gravity casting bracket
Product Description:
Aluminum gravity casting bracket.Before the pump starts, the pump shell is filled with the liquid being transported;After starting, the impeller is driven by the shaft to rotate at high speed, and the liquid between the blades must also rotate.Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and the energy is obtained.In the volute, the liquid slows down due to the gradual expansion of the flow channel, which converts part of the kinetic energy into static pressure energy, and finally flows into the discharge pipe at a higher pressure and sends it to the place where it is needed.When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. As the pressure above the reservoir level is greater than the pressure at the pump inlet, the liquid is continuously pressed into the impeller.Visible, as long as the impeller continues to turn, the liquid will continue to be inhaled and discharged.Open pump pressure at the entrance of P1 is equal to or less than with the saturated vapor pressure of liquid temperature PV, liquid vaporization, air bubbles under the effect of high pressure, the rapid condensation or rupture pressure greatly, the impact of high frequency, strong vibration and noise of pump body liquid flow rate and pressure head (outlet pressure) and the efficiency decreases obviously.This phenomenon is called cavitation in the open centrifugal pump.
Price:10.00
Product Website:[Misafirler Kayýt Olmadan Link Göremezler Lütfen Kayýt Ýçin Týklayýn ! ]
Company Description
Taizhou Huangyan Xinxing Machinery Fittings Co.,Ltd
Address:ZheJiangZheJiangTaiZhouHuangyanNo.61 Yuandian Road, Yuanqiao Town, Huangyan District, Taizhou City, Zhejiang Province
Descption:Xinxing Machinery was founded in 1983. We had been focused on aluminum gravity casting for more than 26 years and we are specialized in it. In the year 2002, we passed TS16949 Quality System Certification and established the enterprise purpose of "high standard, high quality, refinement, zero defect". "Lean Production" was introduced in 2014 to provide higher quality and more competitive price products for our customers. New factory covering an area of 47,000㎡ started to build in Sanmen Coastal Industrial City in 2018. Now Xinxing machinery has been one of the top manufactures of aluminum gravity casting parts.
Registered Capital:100
EmployeeNum:100
Taizhou Huangyan Xinxing Machinery Fittings Co.,Ltd
Contact:LeoXu
Telphone:86-576-89187693-0
Fax:86-576-84878001-0
Email:xxmachinery@aliyun.com
Company Website:[Misafirler Kayýt Olmadan Link Göremezler Lütfen Kayýt Ýçin Týklayýn ! ]